9mm x 14 mm ceramic package smd oscillator, lvpecl / lvds ism68 series ilsi america phone: 775-851-8880 ? fax: 775-851-8882 e-mail: e-mail@ilsiamerica.com www.ilsiamerica.com 06/09 specifications subject to change without notice page 1 pin connection pin connection 1 n.c. 4 output 2 enable 5 comp. output 3 gnd 6 vcc 5.08 13 4 6 2 5 9.78 max. 3.0 1.27 2.54 8.8 14.22 max. 0.46 4.7 max. ref. 7.62 dimension units: mm product features: applications: surface mount package test equipment reflow compatible server & storage compatible with leadfree processing sonet /sdh note: a 0.01 f bypass capacitor is recommended between vcc (pin 6) and gnd (pin 3) to minimize power supply noise. ** not available for all temperature ranges. *** frequency, supply, and load related parameters. frequency 1 mhz to 750.000 mhz output level lvds lvpecl vod = 393 mv typ., 475 mv max. ?0? = vcc - 1.63 v max. ?1? = vcc - 1.02 v min. duty cycle specify 50% 10% or 5% see table in part number guide rise / fall time 0.6 ns max. output load lvds lvpecl 100 : differential 50 : to vcc - 2.0 vdc frequency stability see frequency stability table in part numbering guide (includes room temperature tolerance and stability over operating temperature) start-up time 10 ms max. enable / disable time 100 ns max. supply voltage see input voltage table, tolerance 5 % current lvds = 90 ma max., *** lvpecl = 130 ma max. *** operating see operating temperature table in part number guide storage -55 q c to +125 q c part number guide sample part number: i sm68 - 3169bh - 156.250 package input voltage operating temperature symmetry (duty cycle) output stability (in ppm) enable / disable frequency i sm68 - 3 = 3.3 v 1 = 0 q c to +70 q c 5 = 45 / 55 max. 8 = lvds **a = r 25 h = enable - 156.250 mhz 7 = 3.0 v 6 = -10 q c to +70 q c 6 = 40 / 60 max. 9 = lvpecl b = r 50 2 = 2.7 v 3 = -20 q c to +70 q c c = r 100 6 = 2.5 v 4 = -30 q c to +75 q c 2 = -40 q c to +85 q c e-mail@ilsiamerica.com ? www.ilsiamerica.com
9mm x 14 mm ceramic package smd oscillator, lvpecl / lvds ism68 series ilsi america phone: 775-851-8880 fax: 775-851-8882 e-mail: e-mail@ilsiamerica.com www.ilsiamerica.com 06/09 specifications subject to change without notice page 2 pb free solder reflow profile: typical application: *units are backward compatible with 240c reflow processes package information: msl = n.a. (package does not contain plastic, storage life is unlimited under normal room conditions). termination = e4 (au over ni over w base metalization). tape and reel information: environmental specifications thermal shock mil-std-883, method 1011, condition a moisture resistance mil-std-883, method 1004 mechanical shock mil-std-883, method 2002, condition b mechanical vibration mil-std-883, method 2007, condition a resistance to soldering heat j-std-020c, table 5-2 pb-free devices (except 2 cycles max) hazardous substance pb-free / rohs / green compliant solderability jesd22-b102-d method 2 (preconditioning e) terminal strength mil-std-883, method 2004, test condition d gross leak mil-std-883, method 1014, condition c fine leak mil-std-883, method 1014, condition a2, r1=2x10-8 atm cc/s solvent resistance mil-std-202, method 215 marking line 1: ilsi and date code (yww) line 2: frequency quantity per reel 1000 a 24 +/-.3 b 12 +/-.2 c 11.5 +/-.2 d 25 +/-1.5 e 80 / 100 f 330 e-mail@ilsiamerica.com ? www.ilsiamerica.com
|